System requirements for SmartCAM V17 have not changed from SmartCAM V14/V15 which added the ACIS® solid-modeling kernel to
all applications and OpenGL graphics in the main graphics
window, additions that provide solid model import, export
and display capability. The system requirements for SmartCAM
V17 applications have been upgraded in support of those
enhancements.
SmartCAM users updating from SmartCAM V13 or earlier
applications should compare their current systems to the
current v17 system requirements and make any necessary
changes prior to installation.
Operating System
SmartCAM is supported on the following 32- or 64-bit
operating systems.
-
Microsoft Windows XP® Professional
-
Microsoft Windows 2000®
-
Microsoft Windows Vista®.
-
Microsoft Windows 7 Professional
Microsoft Windows Vista Business\Windows 7
Professional & Hardware Requirements
SmartCAM V17 applications are compatible with the Microsoft
Windows Vista Business and Windows 7 Professional operating
systems. To get the best performance from SmartCAM, it is
highly recommended that you meet or exceed Microsoft's
recommended hardware requirements for the given operating
system.
Other Operating Systems
SmartCAMcnc does not support SmartCAM running on other
operating systems, and cannot provide assistance to
customers using SmartCAM on other operating systems.
Network Card
Required: Network Interface Card (a.k.a., Ethernet or
NIC card) or motherboard embedded with NIC; this device is
used with SmartCAM software licensing.
IMPORTANT: the network card does NOT need to be attached to
a network, it does, however, need to be enabled and active.
If the network card is not attached to a network, the card
must first be properly configured.
Please read SmartCAM Tech Note 208 found at: Technical_Bulletins\Technote208.htm
Communications Port
RS232 serial port allowing bi-directional data flow (CNC
code file) between computer and machine tool control
Processor (CPU)
Recommended: Intel Pentium® IV or AMD Athlon® XP,
Intel DuelCore or higher
Minimum: Intel Pentium® IV or AMD Athlon® XP
Physical RAM
Recommended: 2 GB or greater
Hard Disk Space
SmartCAM: 30MB for installation.
Predator CNC Editor for SmartCAM: 90MB
Video Card
Recommended: 1280x1024 display resolution with True
Color, 256MB display RAM; hardware-accelerated OpenGL v1.2
(or higher)
Minimum: 1024x768 display resolution with True Color,
32MB display RAM; hardware-accelerated OpenGL v1.2 (or
higher)
Devices
Minimum:
Recommended: Microsoft 3 button wheel mouse
Optional: 3Dconnexion SpaceNavigator
Keyboard
Note: Digitizers must be configured as a mouse.
