|
Prime
Technologies Ltd
Product Download
Index
SmartEDGEcnc
Express (Stand-a-lone version) -
Download version
01/09/2010
SmartEDGEcnc
(For SmartCAM integration)
-
Download version
01/09/2010
SmartEDGEcnc Express installation instructions:
Get your installation pass key:
Click HERE
NEW installation procedure:
-
Download the self extracting ZIP file from the link below
-
Select 'open' to automate the installation procedure and
follow the instructions
-
SmartEDGEcnc will be installed in the following folder
c:\Program Files\SmartEDGEcnc
-
From
the Windows 'Start' option select Programs and SmartEDGEcnc
-
Copy
a short cut of SmartEDGEcnc to the desktop
-
Start
SmartEDGEcnc, select 'Help' and 'SmartEDGEcnc Assistant' for
tutorial
Click HERE for SmartEDGEcnc
Express Download
SmartEDGEcnc installation instructions:
Requires SmartCAM (v14.0+) Milling/Turning
application
Get your installation pass key:
Click HERE
If
SmartEDGEcnc has already been installed please use the
following link to update:
Click HERE for SmartEDGEcnc
UPDATE
NEW installation procedure:
-
Download the self extracting ZIP file from the link below
-
Select 'open' to automate the installation procedure and
follow the instructions
-
SmartEDGEcnc will be installed in the following folder
c:\Program Files\SmartEDGEcnc
-
From
the Windows 'Start' option select Programs and SmartEDGEcnc
-
Copy
a short cut of SmartEDGEcnc to the desktop
-
Edit
your SmartCAM INI file: either Pmill.ini or Amill.ini or
FMM.ini or Afab.ini locate the following section and modify as
illustrated below in BLUE:
-
Start
SmartEDGEcnc, select 'Help' and 'SmartEDGEcnc Assistant' for
tutorial
Click HERE for SmartEDGEcnc Download
Example from SmartCAM INI file - Note format may vary
slightly depending on SmartCAM version and manufacturing
module:
InTrigger=run.smm
OutTrigger=done.smm
[UserMenu]
MenuName1=SmartEDGEcnc
MenuPcb1=c:\Program Files\SmartEDGEcnc\SmartCAM_Utils\SmartEDGEcnc.pcb
[InsertBar]
BarVisible=1
The
SmartCAM menu bar will now have a 'User' pull down menu or a
custom named menu, depending on the version of SmartCAM, with the option to start SmartEDGEcnc
|
